Ammann AV40-2 - Inspect - Engine Oil Level, Coolant Level

8 Maintenance
BNNbOO
ID: 1138310 Issue date January 01, 2010
111
Inspect – engine oil level, coolant level
Checking engine oil level
Use the dipstick to check engine oil
level every day.
The dipstick (1) is located on the left
of the engine.
Check oil level while the roller is-
standing on a level surface and the
engine is cold.
The oil level must be between the up-
per and the lower mark.
Top up the engine oil as required (2).
NOTE
In order to ensure long term engine operating safety, no additives may be
used in the engine oil.
Checking coolant level
Check the coolant level (1) daily.
Check oil level while the roller is
standing on a level surface and the
engine is cold.
The coolant level is visible on the
expansion tank display.
The water level must lie between the
top (X) and the bottom marks (Y).
Top up coolant as required (1).
Warning
Danger of burns!
Only open if the engine and coolant
have cooled down.
2
1
X
Y
1
1