3 Safety
BNNbOO
ID: 1138310 Issue date January 01, 2010
24
Safety (maintenance)
NOTE
Maintenance must only be carried out by trained specialized personnel!
• Only perform maintenance and repair work on the roller if it is static and
secured from rolling away.
• Secure the machine with the joint protection.
• Relieve pressure before working on the hydraulic pipes.
• Disconnect the battery before commencing work on the machine's electrical
systems. Cover it with isolating material or remove it completely. This does
not apply to work requiring an electric current. In the event of injuries
caused by acid, rinse immediately with clean water and consult a doctor.
• Replace all protection devices properly after performing servicing and repair
work.
WARNING!
Gas poisoning!
Do not leave the engine running in enclosed
spaces.
If use of the roller in a confined space cannot be -
avoided, the exhaust fumes must be extracted
directly from the exhaust pipe.
ATTENTION!
Damage to electrical controls!
Never spray the water jet into electrical or electro-
nic components.
Never spray into the engine combustion air intake.
To Next Page
Loading...
