7 Options
BNNbOO
ID: 1138310 Issue date January 01, 2010
89
Automatic vibration
In automatic mode vibration is switched on at speeds greater than 1-2 km/h
and off at speeds less than 1-2 km/h.
Vibration is not possible with the roller at a standstill.
WARNING
Unintentional reaction / accident hazard
If the automatic vibration pre-select switch is set to automatic and vibration is
activated, the roller begins to vibrate as soon as the operating lever is
pushed forwards.
If the driver is surprised by this reaction an uncontrolled and hazardous
action may result.
Manual vibration
Set the pre-select switch (1) to the
Manual position.
The roller vibrates as soon as the
vibration button (2) on the operating
lever is pressed.
Automatic vibration
Set the pre-select switch (1) to the
Auto position.
The roller vibrates as soon as
vibration is activated and the roller
reaches a speed of 1-2 km/hr.
Because the operating lever
deflection angle starts vibration,
slower deflection of the operating
lever is necessary for correct
functioning.
1
2
Automatic
Manual
To Next Page
Loading...
