7 Options
BNNbOO
ID: 1138310 Issue date January 01, 2010
91
Seat heating
The seat heater warms the seat to body temperature.
Switching on seat heating
Switch on the seat heating by
inserting the plug (1) in the rear of the
operating lever console.
The seat heating only works if the
ignition key is at position I, II or III.
NOTE
Extended use of the seat heater with the key at position I may drain the
battery.
Plug storage
When the seat heating is not being
used the cable and plug can be
stowed behind the operating lever
console.
Put the cable in the clamp (1).
1
1
To Next Page
Loading...
