7 Options
BNNbOO
ID: 1138310 Issue date January 01, 2010
73
Revolving warning light
Switching on the revolving warning
light
Turn the switch (1) to the right to
switch on the revolving warning light.
NOTE
The machine may be fitted with a revolving warning light, but the
corresponding switch may be missing. In this case the revolving warning light
operates continuously as soon as the ignition key is in position II.
Position during operation
The revolving warning light (1) is
located at the back right on the roll-
over bar (Rops) during operation.
WARNING
Risk of injury!
The revolving warning light must always be installed at the top if the ROPS is
up.
The light may only be operated at the top.
1
1
To Next Page
Loading...
