6 Operating
BNNbOO
ID: 1138310 Issue date January 01, 2010
58
Starting the engine
Start procedure
Turn the ignition key clockwise to
position III.
Release the ignition key as soon as
the engine starts.
NOTE
The control lamps for engine oil
pressure, charging, hydraulic brake
release/supply pressure light up
when the ignition is switched on.
They extinguish once the engine is
running.
Pre-heating
If the outside temperature is below 0° C, first turn the ignition key to position II,
hold it in this position for 15 seconds, and then turn it to position III.
ATTENTION!
When starting and driving a cold machine, with cold hydraulic oil, braking
distances are longer than if the oil has reached normal working temperature.
To Next Page
Loading...
