Appendix B - Commands / Messages
64
Tango Series Audio Controllers
Controller Status Messages (Cont.)
MPGr,s Paging Status, where:
•‘r’ denotes the room, (1-64)
•‘s’ denotes the Paging state, valid values are:
0: Off
1: On
MPVr,v Paging Volume Status, where:
•‘r’ denotes the room, (1-64)
•‘v’ denotes the volume setting, valid values are:
101: Mute
100...0: -100...0 dB
MBALr,x Balance Status, where:
• ‘r’ denotes the room, (1-64)
• ‘x’ denotes the balance, valid values are:
0: balanced evenly
1...10: 100%.... 10% Left
11...20: 10%... 100% Right
MPRVr,x Privacy Status, where:
•‘r’ denotes the room, (1-64)
•‘x’ denotes the privacy status, valid values are:
0: Off
1: On
MGSTr,v,bb,t,s,
r,z,l,p
General Status, where:
•‘r’ denotes the room, (1-64)
•‘v’ denotes the volume setting, valid values are:
101: Mute
100...0: -100...0 dB
•‘b’ denotes the bass level, valid values are:
0: level
1...10: -10...-1 dB
11...20: 1...10 dB
•‘t’ denotes the treble level, valid values are:
0: level
1...10: -10...-1 dB
11...20: 1...10 dB
•‘s’ denotes the source, valid values are 1-8
•‘r’ denotes the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
5: SRS not available for this room
•‘z’ denotes the zone, valid values are:
0: not connected to a zone
1...32: zone ID
•‘l’ denotes the balance, valid values are:
0: balanced equally
1...10: 100% … 10% Left
11...20: 10% … 100% Right
To Next Page
Loading...
