Appendix B - Commands / Messages
66
Tango Series Audio Controllers
Controller Status Messages (Cont.)
MSSTs,p,x Source Status, where:
•‘s’ is the source, valid values are 1-8
•‘p’ is the source state, valid values are:
0: Off
1: On
2: Paused
3: Mute off (Sirius module only)
4: Mute on (Sirius module only)
5: Sleep on (Sirius module only)
•‘x’ is a variable length data string that varies with the type of source:
0: undefined – p where:
1: AM/FM Tuner – b,m,f where:
‘b’ is the band: 1 = AM, 2 = FM
‘m’ is the mono/stereo status: 1 = mono, 0 = stereo
‘f’ is the currently tuned frequency (if it is known) (5 digits max)
2: CD Changer - none
3: DVD Player - none
4: Satellite Receiver - none
5: Audio Server - none
6: Other 1 – none
7: Custom XM – none
8: Internal Sirius Tuner - none
20: Internal AM/FM Tuner– b,m,s,fffff where:
‘b’ is the band: 1 = AM, 2 = FM
‘m’ is the mono/stereo status: 1 = mono, 0 = stereo
‘s’ is the seek/tune status: ‘1’ = seek, ‘0’ = tune
‘f’ is the currently tuned frequency (5 digits max)
CSTv,h,m,s Clock Status, where:
•‘v’ is the clock version
•‘h’ is the hour, valid values are from 0-23
•‘m’ is the minute, valid values are from 0-59
•‘s’ is the second, valid values are from 0-59
CALMr,s,v,h,m Alarm Status, where:
•‘r’ is the room, valid values are from 1-64
•‘s’ is the source, valid values are:
0: no alarm is set
1-8: alarm is set for the corresponding source
•‘v’ is the volume, valid values are:
101: Mute
0-55: 0-(-55) dB
•‘h’ is the hour, valid values are from 0-23
•‘m’ is the minute, valid values are from 0-59
RSSTx,y,z General Sirius Radio Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Sirius Status Index (0-7)
•‘z’ is the Status Message
RSIDx,y
Sirius Radio ID Status, where:
•‘x’ is the Sirius number (1-2)
•‘y’ is the Sirius Radio ID String (36 characters max)
To Next Page
Loading...
Need help?
General
