AMX DAS-T0804-SIG User Manual

AMX Duet Module Interface Specifications
73
Tango Audio Controllers
Tango Controllers - Command Control (Cont.)
Command Description
?PROPERTY-<key> Get the value of a property <key>. If the value is not initialized, an
empty string is returned.
This query should be issued on port 1.
<key> : SourceX (where X=1...8) = tells you what
the source is programmed as on the actual
device.
RoomsAvailable = # of rooms in the system
SourcesAvailable= # of sources available
Example:
?PROPERTY-Source2
?PROPERTY-RoomsAvailable
REINIT Re-initializes the communication link and data.
This command should be issued on port 1.
Note: This command deletes any messages waiting to go out to
the device.
Example:
REINIT
*TUNERPRESETSAVE-<preset>,<freq> Saves a tuner preset.
This command should be issued on the port matching the input
number.
To clear a preset use a space character as frequency.
Replies with TUNERPRESETSAVE-<preset>,<freq>
<preset> : 1...8 = valid preset range
<freq> : string = new frequency (or space to
clear)
Example:
TUNERPRESETSAVE-1,106.5
?VERSION Query for the current version number of the Duet module.
This query should be issued on port 1.
?VERSION
?XCH Get the current tuner station.
This query should be issued on the port matching the input number
you want to query.
Example:
?XCH
XCH-<station> Set the current tuner station.
This command should be issued on the port matching the input
number you want to query.
<station>: string
Example:
XCH-101.1 (for FM stations)
XCH-550 (for AM stations)

AMX DAS-T0804-SIG Specifications

General

Brand	AMX
Model	DAS-T0804-SIG
Category	Recording Equipment
Language	English