TPI Configuration Pages
63
TPI-PRO-DVI - Instruction Manual
Use the slider on this page to select a known input resolution (use the Up/Down arrows to adjust).
When the slider is set all the way to the left, it selects "auto", and the TPI automatically sets the input resolution.
Press Done to save the Input resolution setting and close the Input Resolution popup page.
The same functionality can be achieved via the "resolution=" option of the ^SLT command (see page 113).
FIG. 66
Input Resolution popup page
Position the slider to it’s left-most position to set Input Resolution to "auto"
To Next Page
Loading...
