AMX UDM-0808-SIG User Manual

UDM-0808-SIG WebConsole
33
UDM-0808-SIG, UDM-RX02N and UDM-ABB-8-SIG Operation /Reference Guide
Clock Manager - NIST Servers
Select NIST Servers from the Clock Manager sub-menu (or from the main Clock Manager page), and the
NIST Server Manager page will be displayed (FIG. 28):
Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).
The options on this page allow you to select the NIST server that will be queried at each clock
synchronization, and allow you to add more NIST servers to the list.
To add a NIST server, enter the NIST Server Name, IP Address and Location in the fields provided.
To remove a NIST server from the list, click the Remove button.
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
FIG. 28 Clock Manager - NIST Server Manager page
Only one NIST server is selectable at any given time.

AMX UDM-0808-SIG Specifications

General

Brand	AMX
Model	UDM-0808-SIG
Category	Receiver
Language	English