Safety instructions
qTOWER
3
/ qTOWER
3
G Edition 03.19 15
2.8 Standards and directives
Safety class and safety type
The qTOWER³ features protection class I.
The casing features protection type IP 20.
Device safety
The qTOWER³ complies with the safety standards
EN 61010-1:2010
UL 61010-1:2012
CAN/CSA-C22.2 No. 61010-1-12:2012
EMC compatibility
The qTOWER³ has been tested for radio interference suppression and interference
resistance and meets the requirements of
EN 61326-1:2013
EN 61326-2-6:2006
The qTOWER³ complies with the applicable requirements of EMC directive 2014/30/EU
and low voltage directive 2014/35/EU.
Environmental compatibility
The qTOWER³ has been tested for environmental compatibility and meets the require-
ments of
DIN ISO 9022-2:2015-06
DIN ISO 9022-3:2015-08
DIN EN 60068-2-64:2009-04
DIN EN 60068-2-27:2010-02
DIN EN 60068-2-31:2009-04
EU directives
The qTOWER³ is designed and tested in accordance with standards meeting the re-
quirements of EU directives 2014/35/EU and 2014/30/EU. The device leaves the manu-
facturer in a pristine and technically safe state.
Federal Communications Commission Advisory (U.S. only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device doesn´t cause harmful interference, and (2) accepts
any interference (including interference that may cause undesired operation). This de-
vice complies with Part 18 of the FCC Rules.
Interference-causing Equipment Standards (Canada only)
This device complies with Canadian ICES-001 / NMB-001.
To Next Page
Loading...
