- 24 -
Programming controller for Individual valve -
Independent Program I
2. Setting Irrigation Duration I (Independent Program )
It is possible to program irrigation duration for each valve from one minute up to 9 hours (8:59).
• Turn selector to DURATION mode (in Independent
I program).
• The display will show: symbol
I, duration , valve - in line with the selected valve, and hour
digits.
• Press on
. The hour digits will blink. Using and as necessary set the number of desired
hours.
• Press on
. The minute digits will blink. Using and as necessary, set the number of minutes
desired.
ATTENTION !
A valve with irrigation time set
at 0:00 will not open.
The selector should be returned to the TIME/DAY mode
following modification or ending of the program.
To Next Page
Loading...