- 18 -
Programming of valve-group irrigation
1.Weekly Programming
• In this operation the days of the week for irrigation will be set for valves connected to the
designated program.
• Tune the selector to the Irrigation Days/Cycle (Programs A, B, and C).
• Press on
and select weekly programming .
• Press on
. At the top of the display panel a blinking arrow will appear under Sunday. If you
select to set Sunday as an irrigation day press
. The arrow under Sunday will remain set and
stop blinking while the arrow under Monday will begin to blink. If you do not select to set Sunday
as an irrigation day press
. and the arrow will disappear and an arrow under Monday will begin
blinking, and so forth.
The selector should be returned to the TIME/DAY mode
following modification or ending of the program.
To Next Page
Loading...