Andor Technology Mechelle User Manual

14
Version 4.2 rev 06 Oct 2020
8.2 x 8.2 mm / 512 x 512 sensor
Lowest Noise Imaging EMCCD
Mechelle
Me-opt-0009 laser alignMent Module safety label
laser aperture
The indicated position of the Laser Aperture is where the laser is emitted from this product.
laser classification and Warning
This is a Class 3R product that could harm your eyes if they are exposed to the beam. See section on ‘Laser Class
Practical Differences’ above for more details. Avoid direct eye exposure to the laser beam.
radiation output
The ‘maximum output’ dened by IEC 60825-1 § 3.58 and § 7.9 is “the maximum accessible emission that is used to
determine the class of the laser product”. Note that this is as measured using a 7 mm aperture stop at 100 mm from
the accessible aperture of the module as per Condition 3, which simulates eye exposure. However, the total optical
power right at the output of the module will be higher, typically 5.35 mW at the closest point of human contact.
standards inforMation
IEC 60825-1:2014 has been used to determine the classication of the product and to provide the Radiation Output
marked on the product.

Andor Technology Mechelle Specifications

General

Brand	Andor Technology
Model	Mechelle
Category	Laboratory Equipment
Language	English