55
Version 4.2 rev 06 Oct 2020
8.2 x 8.2 mm / 512 x 512 sensor
Lowest Noise Imaging EMCCD
Mechelle
SECTION 5: TROUBLESHOOTING
The optics in the Mechelle spectrograph are factory adjusted before delivery and the design features few adjustable
or moving parts. Therefore it requires minimal interaction once setup in the software and in use. Refer to the
troubleshooting sections of your camera and software guides. If you need further assistance please contact Andor
Customer Support. The details of your nearest representative can be found on our website.
To Next Page
Loading...