Andor Technology Mechelle User Manual

59
Version 4.2 rev 06 Oct 2020
8.2 x 8.2 mm / 512 x 512 sensor
Lowest Noise Imaging EMCCD
Mechelle
7.4 Me-opt-0007 colliMatoR/collectoR WitH alignMent laseR speciFications
Wavelength 650 nm nominal (640 nm to 665 nm)
Beam Diameter at Laser Aperture 25 – 47 mm
Adjustable Beam Divergence* 0 – 10.29° (0 – 180 mrad)
‡
Maximum Power Output for
Classication
†
0.5 mW max.
Maximum Power Output at Aperture As previous
* Beam divergence is dened as the full-angle, i.e. from edge to edge.
‡ When not virtually collimated, the beam converges to a 2 mm approx. focal spot and then diverges again.
† See comments in ‘Laser Safety and Product Compliance Labels’ about ‘Radiation Output’ denition in IEC 60825-1
7.5 Me-opt-0009 laseR alignMent Module speciFications
Wavelength 650 nm nominal (640 nm to 665 nm)
Beam Diameter at Laser Aperture 2 mm
Beam Divergence Value* 12° (209.44 mrad)
Maximum Power Output for
Classication
†
1.5 mW max.
Maximum Power Output at Aperture 5.35 mW typ.
* † As previous table
7.6 speciFications FoR FibRe output attacHed to Me-opt-0009 laseR Module
Wavelength 650 nm nominal (640 nm to 665 nm)
Beam Diameter at Laser Aperture 50 µm
Beam Divergence Value* 26.45° (461.64 mrad)
Maximum Power Output for
Classication
†
0.2 mW max.
Maximum Power Output at Aperture 1.65 mW typ.
* † As previous table

Andor Technology Mechelle Specifications

General

Brand	Andor Technology
Model	Mechelle
Category	Laboratory Equipment
Language	English