31
Version 4.2 rev 06 Oct 2020
8.2 x 8.2 mm / 512 x 512 sensor
Lowest Noise Imaging EMCCD
Mechelle
In this instance, the Spectrograph X-Calibration dialog box appears:
Click on the Spectrograph Setup tab and the Spectrograph Setup dialog box appears.
In the XML Setup File eld of the Mechelle Setup dialog box, click on the
button, then locate and select the
appropriate .xml le for the Mechelle model being used.
Click the Open button.
Click OK. If prompted to restart, do not restart at this point during the setup procedure, as the conguration le
(holding the Mechelle setup parameters) will be saved later.
The Mechelle Setup screen will then appear again.
To Next Page
Loading...
