10580-00176 72
When using :CONFigure:ACPower, the state is automatically set to ON.
Factory Preset / *RST:
OFF
Front Panel Access:
Shift-4 (Measure), ACPR, On/Off
See Also:
:CONFigure:ACPower
[:SENSe]:CHPower Subsystem
This subsystem includes commands related to configuring the channel power
measurement.
Channel Power Integration Bandwidth
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <freq>
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration?
Sets the integration bandwidth for the channel power measurement.
Integration bandwidth must be less than or equal to the frequency span.
Factory Preset / *RST:
10.35 MHz
Range: 10 Hz to 7.1 GHz
Default Unit: Hz
Front Panel Access:
Shift-4 (Measure), Channel Power, Ch Pwr Width
See Also:
[:SENSe]:FREQuency:SPAN
Channel Power Measurement State
[:SENSe]:CHPower:STATe OFF|ON|0|1
[:SENSe]:CHPower:STATe?
Sets the state of the channel power measurement, ON or OFF.
When using :CONFigure:CHPower, the state is automatically set to ON.
Factory Preset / *RST:
OFF
Front Panel Access:
Shift-4 (Measure), Channel Power, On/Off
See Also:
:CONFigure:CHPower
[:SENSe]:FSTRength Subsystem
This subsystem includes commands related to configuring the field strength
measurement.
Field Strength Antenna
[:SENSe]:FSTRength:ANTenna <antenna>
[:SENSe]:FSTRength:ANTenna?
Selects an antenna from the antenna list to use for field strength measurement result
calculations.
To Next Page
Loading...
Need help?
General
