Anritsu Spectrum Master MS2721B Programming Manual

10580-00176 90
To make an channel count measurement with settings other than the default values send
• :CONFigure:DEMod CDP
• Commands to set desired settings
• :READ:DEMod:NUMChannels?
Default Units: dB
See Also:
:CONFigure:DEMod CDP
Measure Synch Channel Power
:MEASure:DEMod:SPOWer?
Sets the active measurement to code domain power, sets the default measurement
parameters, triggers a new measurement and returns the synch channel power results.
It is a combination of the
commands:CONFigure:DEMod:CDP;:READ:DEMod:SPOWer?
For a description of the default code domain power measurement parameters see
:CONFigure:DEMod:CDP.
To make a synch channel power measurement with settings other than the default values
send
• :CONFigure:DEMod CDP
• Commands to set desired settings
• :READ:DEMod:SPOWer?
Results are returned as 3 comma-delimited values: SCH power, PSCH power, SSCH
power.
Default Units: dBm
See Also:
:CONFigure:DEMod CDP
Measure Transmitter Frequency
:MEASure:DEMod:TXFRequency?
Sets the active measurement to code domain power, sets the default measurement
parameters, triggers a new measurement and returns the transmitter frequency results.
It is a combination of the
commands:CONFigure:DEMod:CDP;:READ:DEMod:TXFRequency?
For a description of the default code domain power measurement parameters see
:CONFigure:DEMod:CDP.
To make a transmitter frequency measurement with settings other than the default values
send
• :CONFigure:DEMod CDP
• Commands to set desired settings
• :READ:DEMod:TXFRequency?

Anritsu Spectrum Master MS2721B Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2721B
Category	Measuring Instruments
Language	English