Anritsu Spectrum Master MS2721B Programming Manual

10580-00176 89
Measure Frequency Error
:MEASure:DEMod:FERRor?
Sets the active measurement to code domain power, sets the default measurement
parameters, triggers a new measurement and returns the frequency error results.
It is a combination of the
commands:CONFigure:DEMod:CDP;:READ:DEMod:FERRor?
For a description of the default code domain power measurement parameters see
:CONFigure:DEMod:CDP.
To make a frequency error measurement with settings other than the default values send
• :CONFigure:DEMod CDP
• Commands to set desired settings
• :READ:DEMod:FERRor?
Default Units: Hertz
See Also:
:CONFigure:DEMod CDP
Measure Code Domain Noise Floor
:MEASure:DEMod:NFLoor?
Sets the active measurement to code domain power, sets the default measurement
parameters, triggers a new measurement and returns the noise floor results.
It is a combination of the
commands:CONFigure:DEMod:CDP;:READ:DEMod:NFLoor?
For a description of the default code domain power measurement parameters see
:CONFigure:DEMod:CDP.
To make a noise floor measurement with settings other than the default values send
• :CONFigure:DEMod CDP
• Commands to set desired settings
• :READ:DEMod:NFLoor?
Default Units: dB
See Also:
:CONFigure:DEMod CDP
Measure Code Domain Channel Count
:MEASure:DEMod:NUMChannels?
Sets the active measurement to code domain power, sets the default measurement
parameters, triggers a new measurement and returns the number of channels.
It is a combination of the
commands:CONFigure:DEMod:CDP;:READ:DEMod:NUMChannels?
For a description of the default code domain power measurement parameters see
:CONFigure:DEMod:CDP.

Anritsu Spectrum Master MS2721B Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2721B
Category	Measuring Instruments
Language	English