Anviz C2C - Basic Parameter Settings; T&A Status Setting

98
5.6.1 Basic parameter settings
Click the [Basic Parameter Setting]. The [Basic Parameter Setting] pops up:
Com port Communication delay time (1-5) sec.: The default time is 3s.
Network Communication delay time (1-20) sec.: The default time is 5s.
□ Communication failed, automatically exit current operation: If timeout is
larger than ‘Communication delay time’, software will automatically exit.
□ In Realtime Monitoring, voice prompts “Department name”: During real-time
monitor, if employee is access granted, the software will voice prompt employee
department and name.
□ Clear the data after downloading: After downloading records completed,
delete the record downloaded from machine automatically.
Click the button [OK] to save the setting.
5.6.2 T&A Status setting
Click the [T&A Status setting] option, and the [T&A status setting] window pops
up: