13
not existed in USB pen driver, it can’t be uploaded successfully.
2.3.4 Clock Setup
Set the system parameters including【 Time Setup 】、【 Display Setup 】、
【Advanced Setup】、【Other Option】、【Self Test】.
In Main menu , select 【Clock Setup】and press【OK】to enter【Clock Setup】
interface.
2.3.4.1 Time Setup
In 【Clock Setup】 menu , select 【Time Setup】and press 【ok】to enter the
【Time Setup】interface.
【Clock Time/ Clock Date】Set the device time and date .The device time date
and time should be correct in order to guarantee the attendance time is correct.
【DST】It is daylight saving time. Normally in summer set few hours forwards,
and set few hours backwards time in autumn.
“Enable” means active the DST.
There are two modes for DST. One is set as Date mode. It is means set a
To Next Page
Loading...
