100
[Old password]: Default password is empty.
If user has modified password, please input this password which is used to log
on system. If it’s wrong, system will prompt,
Click [OK] and input old password again.
[New Pwd]: the password user wants to set.
[Confirm Pwd]: Input new password again to confirm.
If confirm Pwd is different from new one, system will prompt:
Click [OK] button to input confirm password again.
After modifying completed, click [OK] button to save new password and it
prompts:
5.6.5 Database linking setting
Click the [Database linking setting]. The [Data Link Properties] window pops up:
To Next Page
Loading...
Need help?
General
