Anviz C2C - Right Key Menu

73
box pops up:
Click the button [OK] to delete or click the button [Cancel] to cancel.
5.1.4 Right Key Menu
[Select All]: Select all the terminals.
[Reverse Selection]: Select the terminals which are not selected. Cancel the
terminals which are selected.
5.1.4.1 Set device ID
In Pic 5.1.4 select【Set the machine number】and open【Set up】interface：
Modify device ID and click【OK】to save, you can check the device ID in the
setting menu of the terminal.
5.1.4.2 Set the IP Configuration
Click [Set the IP configuration] and open the window: