Anviz C2C - Modify Unit; Delete Unit

72
terminal icon ( ). Please move the cursor to the terminal icon it displays as follows:
The connection state should be normal. So please do communication operation
with machine (i.e. Synchronize time). When connection state is normal, terminal icon
will become blue (
).
5.1.2 Modify Unit
Choose the terminal and then click [Modify Unit], the following window pops up:
Modify the information and then click the button [OK] to save the modification.
Click the button [Cancel] to cancel the modification.
Notice: If the “No” is already exist in the software, following message box pops
up:
Click the button [OK] to set the Unit information again.
5.1.3 Delete Unit
Choose the T&A unit and then click the button [Delete Unit]. Following message
Machine Number: 1
Machine Name: Head office
Serial Number: 500
Communication Method: USB
Connection State: Abnormal