b.
Touch Remove Steps to delete a step.
c.
Touch Add Stages to add a stage.
d.
Touch Remove Stages to delete a stage.
The '+' buons appear while adding a step or stage, while the '–' buons appear
while deleting a step or stage.
Figure 10
Manage Steps screen
Touch Done to nish managing the steps or Advanced Options to modify the
advanced parameters.
3.
Touch Advanced Options to edit the VeriFlex
™
blocks, AutoDelta, Ramp Rates,
and Simulation Mode parameters.
Figure 11 Advanced Options screen
• Touch Simulation Mode to set the simulation mode. The simulation modes
include the following:
– No Simulation
– Applied Biosystems
™
2720
– Bio-Rad
™
T100
™
– Bio-Rad
™
MyCycler
™
– MJ Research
™
PTC-200
– Eppendorf
™
Mastercycler
®
gradient
Chapter 3
Create and run experiments on the instrument
Edit a run method
3
SimpliAmp
™
Thermal Cycler User Guide
17