Applied Biosystems SimpliAmp Thermal Cycler - Page 21

4.
Touch Save As to save the edited run method.
Figure 18 SimpliAmp
™
Thermal Cycler Run Method preview screen
a.
In the Save As screen, enter a name of the edited run method.
Note: Names can be up to 100 characters. Names may not contain any of
the following characters: %*?|;:,!@#$.()<>/\"'`~{}[]=+&^ (tab). Spaces,
underscores, and dashes are allowed.
b.
Touch a folder (for example, )to select a destination folder where
you want to save the run method.
Note: The Save As buon turns to Save in the Edit Method screen once you have
saved the template as a new method.
5.
Touch Save when you are done.
Chapter 3 Create and run experiments on the instrument
Edit a run method
3
SimpliAmp
™
Thermal Cycler User Guide 21