Areva MiCOM C232 - Page 117

7 Settings
(continued)
C232-302-401/402/403/404-603 / C232/EN M/A23 7-25
Definite-time overcurrent
protection
DTOC: Function group DTOC
056 008
Canceling function group DTOC or including it in the configuration. If the
function group is cancelled from the configuration, then all associated
settings and signals are hidden, with the exception of this setting.
Inverse-time overcurrent
protection
IDMT: Function group IDMT
056 009
Canceling function group IDMT or including it in the configuration. If the
function group is cancelled from the configuration, then all associated
settings and signals are hidden, with the exception of this setting.
Limit value monitoring
LIMIT: Function group LIMIT
056 025
Canceling function group LIMIT or including it in the configuration. If the
function group is cancelled from the configuration, then all associated
settings and signals are hidden, with the exception of this setting.
Logic
LOGIC: Function group LOGIC
056 017
Canceling function group LOGIC or including it in the configuration. If the
function group is cancelled from the configuration, then all associated
settings and signals are hidden, with the exception of this setting.