6 Local Control Panel
(continued)
6-34
C232-302-401/402/403/404-603 / C232/EN M/A23
If the configured password has been forgotten, it can be called up on the LCD display as
described below. The procedure involves turning the device off and then on again.
Control Step / Description Control
Action
Display
0 Turn off the device.
1 Turn the device on again. At the very
beginning of device startup, press the four
directional keys (‘left’, ‘right’, ‘up’ and ‘down’) at
the same time and hold them down.
TEST
2 When this condition is detected during
startup, the password is displayed.
Password
1234
3 After the four keys are released, startup will
continue.
TEST
To Next Page
Loading...