9. Assign an IP address (192.0.2.8/24 in this example) to an Ethernet management port.
localhost(config)#interface management 1/1
localhost(config-if-Ma1/1)#ip address 192.0.2.8/24
10. Save the configuration by typing write memory or copy running-config startup-config.
localhost#copy running-config startup-config
11. When the management port IP address is configured, use this command to access the switch from
a host, using the address configured in Step 9:
ssh admin@192.0.2.8
Refer to the Arista Networks User Manual for the complete switch configuration information.
38
To Next Page
Loading...
