ARM Cortex-M3 DesignStart - Chapter 2 Using the Prebuilt FPGA Image

Chapter 2
Using the prebuilt FPGA image
Cortex-M3 DesignStart Eval includes a prebuilt FPGA image file of the Cortex-M3 DesignStart Eval
example system. This chapter describes how to set up the MPS2+ platform to load the prebuilt file and
run a self-test program.
It contains the following sections:
• 2.1 Setting up the MPS2+ FPGA platform on page 2-20.
• 2.2 Running the self-test program on page 2-21.
• 2.3 Connecting to a debugger on page 2-23.
ARM 100896_0000_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved. 2-19
Non-Confidential