ARM Cortex-M3 DesignStart - Arduino Adapter Board

3.6 Arduino adapter board
The MPS2+ platform supports Arduino shields by using the ARM adapter for Arduino board. This is an
expansion board which plugs into the GPIO connectors on the MPS2+ platform and allows you to
connect up to two Arduino shields.
If you want to use the adapter, you can purchase this from ARM.
For more details on how to use the adapter, see the Application Note AN502 Adapter for Arduino for the
Cortex-M Prototyping System (MPS2 and MPS2+).
3 FPGA platform overview
3.6 Arduino adapter board
ARM 100896_0000_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved. 3-30
Non-Confidential