2.3 Connecting to a debugger
The MPS2+ platform supports debug over USB, using CMSIS-DAP. This is a standard interface that is
supported by most debug tools.
For details on connecting and configuring specific debug toolchains, see the ARM
®
Versatile
™
Express
Cortex
®
-M Prototyping System (V2M-MPS2 and V2M-MPS2+) Technical Reference Manual.
2 Using the prebuilt FPGA image
2.3 Connecting to a debugger
ARM 100896_0000_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved. 2-23
Non-Confidential
To Next Page
Loading...
