Arris Xfinity TG1682 - System Requirements; Recommended Hardware; Linux;Other Unix

Xfinity TG1682 Telephony Gateway User's Guide 9
A R R I S
Getting Battery Ethernet
Safety Started Installation Installation Configuration Usage Troubleshooting Glossary
System Requirements
The Telephony Gateway operates with most computers. The following describes
requirements for each operating system; see the documentation for your system
for details on enabling and configuring networking.
To use the Telephony Gateway, you need DOCSIS high-speed Internet service
from your cable company. Telephone service requires that the cable company has
Pack-etCable support.
Recommended Hardware
The following hardware configuration is recommended. Computers not meeting
this configuration can still work with the TG1682, but may not be able to make
maximum use of TG1682 throughput.
 CPU: P4, 3GHz or faster
 RAM: 1GB or greater
 Hard drive: 7200 RPM or faster
 Ethernet: Gig-E (1000BaseT)
Windows
Windows XP, Windows Vista, Windows 7, or Windows 8. A supported Ethernet or
wireless LAN connection must be available.
MacOS
System 7.5 to MacOS 9.2 (Open Transport recommended) or MacOS X. A
supported Ethernet or wireless LAN connection must be available.
Linux/other Unix
Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported
Ethernet or wireless LAN connection must be available.