SETTINGS SCREEN
30
PROGRAMMING, ETC.
The Settings Screen is where all programming and other spa behaviors
are controlled. Each icon on the Settings screen takes you to a different
screen, where one or more setting may be viewed and/or edited.
The Heat Icon takes
you to a screen where you
control the Heat Mode and
the Temperature Range
DUAL TEMPERATURE RANGES (HIGH VS. LOW)
This system incorporates two temperature range settings with indepen-
dent set temperatures. The specic range can be selected on the Settings
screen and is visible on the Main Screen in the upper left corner of the
display. These ranges can be used for various reasons, with a common
use being a “ready to use” setting vs. a “vacation” setting.
Each range maintains its own set temperature as programmed by the user.
This way, when a range is chosen, the spa will heat to the set temperature
associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
More specic Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
Heat
Lock
Time
Filter
Reminders
Light Cycle
Settings
Heat Mode
Heat Mode
Temp Range
Ready
High
To Next Page
Loading...
