40
ADDITIONAL SETTINGS
HOLD - M037*
Hold Mode is used to disable the
pumps during service functions
like cleaning or replacing the
lter. Hold Mode will last for 1
hour unless the mode is exited
manually.
If spa service will require more
than an hour,it may be best to
simply shut down power to the
spa.
The Hold Icon on the Settings screen places the spa in Hold Mode
and displays the System Hold Screen. Touch back to exit Hold Mode on
the Settings Screen places the spa in Hold Mode and displays the System
Hold screen. Touch Back to exit Hold Mode.
DRAIN MODE
Some spas have a special feature that allows Pump 1 to be employed
when draining the water. When available, this feature is a component of
Hold Mode.
System Hold
Holding for 0:60
System Hold
Holding for 0:60
Off
Touch this icon
to turn the Drain
Pump On or Off
To Next Page
Loading...
