SYSTEM RELATED MESSAGES
GFCI TEST FAILED (SYSTEM COULD NOT TEST THE GFCI) – M036
(North America Only) May indicate an unsafe installation. Contact your
dealer or service organization.
A PUMP MAY BE STUCK ON – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER
THE WATER. Contact your dealer or service organization
Not all messages may be displayed.
HOT FAULT – M035
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your
dealer or service organization
Some messages can be reset from the panel. Messages that can
be reset will appear with a Clear Icon at the bottom of the Message
Screen. Press the Clear Icon text to reset the message.
REMINDER MESSAGES
GENERAL MAINTENANCE HELPS
Reminder Messages can be suppressed by using the Reminders Screen.
Reminder Messages can be chosen individually by the Manufacturer. They
may be disabled entirely, or there may be a limited number of reminders
on a specic model. The frequency of each reminder (i.e. 7 days) can be
specied by the Manufacturer.
CHECK THE PH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals
Check sanitizer level and other water chemistry with a test kit and adjust
with the appropriate chemicals.
51
Clear
To Next Page
Loading...
