Artesian Spas PLATINUM ELITE - System Information

SYSTEM INFORMATION
The System Information Screen displays various settings and
identication of the particular system.
System Model
Displays the Model Number of the System.
Panel Version
Displays a number of the software in the topside control panel.
Software ID (SSID)
Displays the software ID number for the System.
Conguration Signature
Displays the checksum for the system conguration le.
Current Setup
Displays the currently selected Conguration Setup Number.
Dip Switch Settings
Displays a number that represents the DIP switch positions of S1 on the
main circuit board.
Heater Voltage (Feature not used on CE rated systems.)
Displays the operating voltage congured for the heater.
Heater Wattage as Congured in Software (CE Systems Only.)
Displays a heater kilowatt rating as programmed into the control system
software (1-3 or 3-6).
Heater Type
Displays a heater type ID number.
INFORMATION
45
Cleanup Cycle Off
Ozone On
Spa State Running
Temp Range High
Temp Limit 104 F
Temperature 78 F
Sys Info