SPA BEHAVIOR
35
FREEZE PROTECTION
If the temperature sensors within the heater detect a low enough tem-
perature, then the water devices automatically activate to provide freeze
protection. The water devices will run either continuously or periodically
depending on conditions.
In colder climates, an optional freeze sensor may be added to protect
against freeze conditions that may not be sensed by the standard sensors.
Auxiliary freeze sensor protection acts similarly except with the tempera-
ture thresholds determined by the switch. See your dealer for details.
CLEAN-UP CYCLE (OPTIONAL)
When a pump or blower is turned on by a button press, a clean-up cycle
begins 30 minutes after the pump or blower is turned off or times out. The
pump and the ozone generator will run for 30 minutes or more, depending
on the system.
TIME-OF-DAY
Be sure to set the Time-of-Day. Setting the time-of-day is important for
determining ltration times and other background features.
The Time Icon on the Settings Screen takes you to a screen where
you control the Time-of-Day. On the Time-of-Day screen, simply select
the Hours and Minutes. Use the Up and Down Buttons to make changes,
then Save.
If no time-of-day is set in the memory an Information Screen will appear.
If you exit it and Information Icon will appear at the bottom of the Main
Screen, until the time-of-day has been set.
Time of Day
To Next Page
Loading...
