ADDITIONAL SETTINGS
42
CLEANUP CYCLE
Cleanup Cycle Duration is not always enabled, so it may not appear.
When it is available, set the length of time Pump 1 will run after each use.
0-4 hours are available. Settings it to 0.0 Hr keeps the Cleanup Cycles
from running.
The Cleanup Icon on the Settings Screen takes you to the Clean-
up Cycle screen.
LANGUAGE
The Language Icon on the Settings Screen takes you to the Lan-
guage screen.
Change the language displayed on the panel.
Cleanup Cycle
Language Language
English
French
Spanish
German
Italian
Czech
Swedish
To Next Page
Loading...
