EasyManua.ls Logo

Arthrex Highspeed 200 - User Manual

Default Icon
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DrillSaw Highspeed 200™
User’s Guide
The Arthrex DrillSaw Highspeed 200™ User’s Guide provides
safety operation information for all components of the
Arthrex DrillSaw Highspeed 200, including accessories. All
operating personnel must read this User’s Guide thoroughly
prior to using this system and follow all safety warnings,
cautions, and precautions.
Arthrex, Inc.
1370 Creekside Blvd.
Naples, FL 34108-1945 USA
Toll Free: 1-(800) 934-4404
www.arthrex.com
Arthrex GmbH
Erwin-Hielscher-Strasse 9
81249 München, Germany
Tel: +49 89 909005-0
www.arthrex.de
DFU-0225-2
Revision 0
September, 2018
© 2016 Arthrex, Inc. All rights reserved
AR-200

Table of Contents

Questions and Answers

  • S
    scantrellAug 1, 2025
    What to do if Arthrex Highspeed 200 Saw displays 'Call service'?
    • J
      jennifer75Aug 1, 2025
      If the Arthrex Saw displays a 'Call service' error, first switch off the device and restart it. If the error message reappears, it indicates a need to contact an authorized Arthrex service partner for further assistance.
  • M
    moralesashleyAug 5, 2025
    What to do if Arthrex Saw electronics are overloaded?
    • Y
      Yolanda MejiaAug 5, 2025
      If the Arthrex Saw electronics are overloaded, switch off the device and then restart it.
  • B
    Brian ParkAug 10, 2025
    What to do if Arthrex Highspeed 200 motor is faulty?
    • R
      Robin CarlsonAug 10, 2025
      If the Arthrex Saw motor is faulty, connect a functioning motor.
  • J
    Jeffrey AndradeAug 14, 2025
    What to do if I get a foot control error on my Arthrex Highspeed 200?
    • B
      Brandon AndersonAug 14, 2025
      If you encounter a foot control error with your Arthrex Saw, connect a functioning foot control unit or release the engaged button on the foot control.
  • M
    Mr. Raymond PattonAug 17, 2025
    How to fix Arthrex Highspeed 200 Saw motor not recognized?
    • P
      patriciacantuAug 17, 2025
      If the Arthrex Saw motor is not recognized, connect the motor.
  • R
    Robin HarrisAug 22, 2025
    What to do if Arthrex Highspeed 200 motor shows an error?
    • T
      Terry HendersonAug 23, 2025
      If the Arthrex Saw motor shows an error, connect a functioning motor.
  • M
    Margaret MathisAug 27, 2025
    What to do if shift or PLUS/MINUS buttons are activated on Arthrex Saw startup?
    • T
      Tyler GeorgeAug 27, 2025
      If the shift buttons or PLUS/MINUS buttons are activated when switching on the Arthrex Saw device, release the activated button, switch off the device, and then restart it.

Summary

General Warnings and Safety Notices

Important Safety Conventions

Critical safety guidelines and conventions to be understood by users.

Product Description and Intended Use

Product Description

Intended Use

Specifies the intended surgical applications and user profile for the device.

Contraindications

Technical Specifications

Console AR-200 C Specifications

Motor AR-200 M Specifications

Motor AR-200 M-ISO Specifications

Foot Control Unit Specifications

Setup

How to Set Up the Console

Instructions for initial console setup and placement.

Electromagnetic Compatibility (EMC)

Motor Detection

Pump Tubing

AR-200 H Handle Setup

General Settings

How to adjust general system settings like date, time, and volume.

General Settings: Changing the Date

General Settings: Changing Volume

AR-200 Settings

Settings specific to the AR-200 system configuration.

AC Power Safety Considerations

Critical safety guidelines for connecting the device to AC power.

Basic Setup Procedure for the AR-200

A comprehensive guide to setting up the entire AR-200 system.

Connecting and Removing Attachments

Procedure for attaching and detaching accessories from the motor.

AR-200 SP Spray Clip Setup

Screen Navigation Overview

Explanation of how to navigate through the console's display screens.

General Settings: Changing the Time

General Settings: Reset Factory Setting

Factory Settings (P1-P6)

Pre-programmed settings for various operational modes.

Changing the Foot Controller Mode

How to switch between variable and ON/OFF foot control modes.

General Settings: Changing Contrast

Operation and Frequently Used Functions

Changing the Program

How to select and change operational programs.

Changing the Torque

How to adjust the motor torque settings.

Changing Settings with the Foot Control Unit

Using the foot control unit to change programs and motor direction.

Changing the Speed

How to adjust the motor speed.

Changing the Coolant Flow

How to adjust the coolant flow rate.

System Shutdown

Cleaning and Disinfecting

Preliminary Cleaning

Motor and Spray Clip Cleaning

Foot Control Unit (S-N1) Cleaning

Console (AR-200 C) Cleaning

Machine Wash Parameters

Sterilization

Motor and Spray Clip Sterilization

Steam Sterilization Parameters

Maintenance

Periodic Maintenance

Technical Support

Troubleshooting

Faults, Causes, and Solutions

A guide to identifying and resolving common device issues.

Troubleshooting Interference with Other Devices

Arthrex Highspeed 200 Specifications

General IconGeneral
BrandArthrex
ModelHighspeed 200
CategorySaw
LanguageEnglish