Ashida ADR141A - ADR241 A IED Main Screen Interface

ADR141A /
ADR241A
Doc ID: ADR241A _IM_01
Ref ID: ADR241A /IM/PC-SI
Rev No. : 02
Page No. : 49 of 150
3.2 ADR241A IED Main Screen
After checking all settings and loading the IED the following window will be displayed on the
PC screen.
1 2 3 4 5 6 7 8
9
10
11
12
13
14
Figure 5: IED Main screen
The windows/Buttons functions are as follows
Sr. No Name Description
1
Initialize This will initialize relay communication.
2
Refresh It will refresh all windows and parameters
3
Settings This will display the relay Settings
4
History Faults It will read all fault data (which is also available on LCD
display)
5
*Disturbance
Recorder
This is used to view the disturbance with the help of
waveform as well as parameters
6
Reset This is used to reset the relay.
7
Synchronize This is used to synchronize the relay date and time with PC
8
Device Healthy This window indicates the healthy condition of the relay with
software
9
Auxiliary Status This is used to view the input status received by the relay
10
Parameter Display This is used to view the parameters of current.
11
*List of Disturbance
Recorder
This is used to view the last 5 faults saved in the relay with
fault number.