Asus ESC4000A-E12 - Performance Tuning Menu

4-8
Chapter 4: BIOS Setup
4.4 Performance Tuning menu
The Performance Tuning menu items allow you to change performance related settings for
different scenarios.
Optimized Performance Setting [Default]
Allows you to select performance settings for different scenarios.
[Default] Default settings.
[By Benchmark] Optimize for different kinds of benchmarks. Select this option, then select a
benchmark type from the >> list.
[By Workload] Optimize for different kinds of workloads. Select this option, then select a
workload type from the >> list.
This function will reset some BIOS settings that you have changed back to their default
values. Please check your BIOS settings again.
The following item appears only when
Power Balancer
is set to
[Disabled]
, or if Optimized
Performance Setting is set to
[Default]
or
[By Benchmark]
.
Core Optimizer [Disabled]
Allows you to keep the processor operating at the turbo highest frequency for the
maximum performance.
Configuration options: [Disabled] [Auto] [Manual]
The following item appears only when you set
Core Optimizer
to
[Manual]
.
CPU Max frequency [XXXX]
The default value for this option will be the maximum supported frequency
of the CPU installed and may vary between different CPUs.
The following item appears only when
Optimized Performance Setting
is set to
[Default]
or [By Benchmark]
.
Engine Boost [Disabled]
Enable this item to boost the CPU's frequency. Recommended operation at an ambient
temperature of 25°C or below for optimized performance.
Configuration options: [Disabled] [Normal] [Aggressive]
Operate with an ambient temperature of 25
o
C or lower for optimized performance.