ASUS RS720-E9-RS8/RS8-G
4-13
4.4 Internal connectors
1. Serial ATA connectors (7-pin SSATA1-2)
These connectors, controlled by Intel
®
C621 chipset, are for the Serial ATA signal
cables for Serial ATA hard disk drives (SATA 1 connector is used for the optical drive
by default).
If the SATA M.2 (NGFF1) slot is occupied, the SSATA2 slot will be disabled.
2. Mini-SAS HD connector (ISATA1-2)
This motherboard comes with mini Serial Attached SCSI (SAS) HD connectors, the
storage technology that supports Serial ATA. Each connector supports up to four
devices.
To Next Page
Loading...
Need help?
General