POSI-TRACK 2800 & 2810
PAGE 11
ASV, INC.
SECTION
3
CONSOLE DEFINITIONS
MAIN DRIVE CONTROL
(Fig. 1 and Fig. 2)
A) Coolant Temperature Gauge
This gauge indicates the temperature of the en-
gine coolant. Normal coolant temperature
should be between 180° and 205°F.
B) Engine Oil Pressure Gauge
This gauge is used to monitor the engines oil
pressure. If the gauge shows low oil pressure,
turn off the engine and determine the cause.
(Refer to troubleshooting section)
C) Tachometer
The tachometer displays the RPM of the engine.
Normal operating RPM should be between
2,000 and 3,000 RPM. Maximum RPM is
3,000.
D) Hour Meter
The hour meter should be used to schedule
maintenance intervals. (See maintenance chart)
E) Throttle
Controls engine RPM.
F) Drive Levers
Each lever controls one track.
G) High Flow Lever
Controls the direction of the high flow hydraulic
oil.
H) Seat Switch Receptacle
Allows seat switch to be plugged in when seat is
reversed.
GENERAL OPERATION
A
B
C
D
E F
Fig. 1
Fig. 2
G
G
H
To Next Page
Loading...
Need help?
General
