POSI-TRACK 2800 & 2810
PAGE 34
ASV, INC.
BLEEDING THE FUEL SYSTEM
If the engine has run out of fuel, or the fuel sys-
tem has been opened for service, it will be nec-
essary to bleed the fuel system.
1. Loosen the air bleed vent screw two full
turns. (A) (2810, Fig. 46) (2800, Fig. 47)
2. Unscrew primer on the 2800 until the primer
pops up. It is not necessary to unscrew the
primer on the 2810. Pump the primer until fuel
flowing out the vent is free of air bubbles. (B)
(2810, Fig. 46) (2800, Fig. 48)
3. Tighten bleed screw securely, screw the
primer on the 2800 back in until it is secure.
4. Start engine and check for leaks.
GENERAL MAINTENANCE
A
B
B
A
Fig. 46
Fig. 47
Fig. 48
To Next Page
Loading...
Need help?
General
