To Next Page

To Previous Page

POSI-TRACK 2800 & 2810

PAGE 37

ASV, INC.

3. Remove the top plug to vent the case and al-

low the oil to drain. (Fig. 55)

4. Remove the fitting with the hose from the

bottom plug and reinsert the plug.

5. Insert the fitting and hose into the top hole.

Use a 32 oz. Bottle of 80W-90 gear lube or simi-

lar container, which can be filled with gear lube.

Attach the other end of the hose to the bottle.

Squeezing the bottle slightly will help push the

oil into the case. (Fig. 56)

Fig. 55

Fig. 56

GENERAL MAINTENANCE

Questions and Answers:

Need help?

Do you have a question about the ASV 2810 and is the answer not in the manual?

ASV 2810 Specifications

General