Ans. Sys. DTAD operation
Ans. Sys. DTAD operation
101
Answering system
DTAD operation
i
ii
iii
ii
ii
The answering system can store approximately 20 minutes
of messages, memos and announcements, for up to 99
messages in total.
Turn answering system on or off
The answering function of this phone is programmable.
See Set answering system status on page 43 of
Feature setup for programming instructions.
Enter DTAD mode
Press d to access answering system features whether
the answering function is turned on or off. The screen
display is similar to:
If DTAD memory is full and the system cannot store
additional messages, the screen display is similar to:
When the answering system is on and there are new
messages, the DTAD light flashes.
When the answering system is active (programming,
message playback or taking a call), the dial pad keys are
disabled.
To exit DTAD and return to idle screen, press d.
DTADxFULL!
21xMessages
PLAYxNEWxMSGSxxx
DTAD
21xMessages
PLAYxNEWxMSGSxxx
To Next Page
Loading...
Need help?
General
