Feature setup
Feature setup
Reset COVM indicator
If a COVM indicator remains on when there are no
messages on that line, you may have received a false signal
from your local telephone service provider. You can clear
the indicator manually.
1. Press E to begin feature setup.
2. Press - until the screen display includes
SPECIAL OPTIONS.
3. Press E. The screen display includes
LINE USAGE.
4. Press - until the screen display includes
COVMhRESET.
5. Press E. The screen display includes
L1 COVM RESET.
6. Press + or - to scroll through the COVM
Reset menu (L1hCOVMhRESETh...hL4hCOVM
RESET, or ALLhCOVMhRESEThandhDONE).
7. When the line you want to reset is displayed,
press E to remove the message waiting
indicator. You can clear all the lines at once by
choosing ALLhCOVMhRESET. The screen
display includes Reset!
8. Press - until the screen display includes DONE.
9. Press E. The screen display includes
COVM RESET.
10. Press - until the screen display includes
AREA CODES, then proceed to step 5 on
page 40 to program the home or local area
codes.
—OR—
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
39
i
ii
ii
m
mm
mm
j
jj
jj
To Next Page
Loading...
